|
About CTS 294P Steel
Carpenter® CTS® 204P alloy is a highly wear and corrosion resistant, air hardening martensitic cold-work stainless die steel produced using Carpenter's Micro-Melt®
powder metallurgy (P/M) process. The excellent wear resistance of the alloy is provided by a significant volume fraction of hard vanadium-rich carbides, while its corrosion resistance is a result of the chromium-rich matrix.
Carpenter's Micro-Melt® P/M processing creates a segregation-free and homogeneously fine carbide and grain size distribution, and when coupled with the use of molten metal filtration, results in improved cleanliness and toughness.
CTS 204P alloy's uniform microstructure, fine carbide distribution, cleanliness and high chromium content, is responsible for the material's excellent combination of wear resistance, toughness, polishability and corrosion
resistance.
|
John Gray Prototype Graytonium 15V steel (very hard titanium
) 3" blade leather wrap handle finge hole. Overall length is 7.2". Comes with kydex neck sheath.SOLD
John Gray - PA "SLUT" Knife (Slim, Light, Utility, Tactical) 3.5" TSF – 27 Steel blade. Titanium handle with acid etched and heat treated pivot screw and pocket clip. Overall length open is 8.25", closed 4.6" SOLD
John Gray 4" drop point blade with Carbon fiber scales .10 thick, and Titanium liners. Blade is CTS 204P stainless with a Rockwell of 60. Internal ball bearing system with 19 balls on
each side of the blade. Ceramic detent ball with custom made pivots. Overall length open is 9.25" closed is 5.25". Titanium pocket clip. SOLD
John Gray One piece, 3.5" blade of German AEBL steel, Rockwell is 62 with dark rain finish. Comes with kydex
horizontal carry sheath. Overall length is 7.12" SOLD
